Keg Cutout Kit

use this kit for a built in Keg

Note: This video shows us using vertical tubes that are not included with this cutout kit. You may need to add two additional vertical tubes (NE-VT) to frame for your cutout kit. Your module does come with some vertical tubes to use for your various kits, but it may not be enough if you have two or more cutout kits in each module.

Includes:

4  each ctt tubes 28 3/4"

2 each 3 way corner couplers

4 one way couplers

NOTE: You will use the two VT vertical tubes from your module for the right and left side of fridge. You will also use the one way couplers from the module to connect the rear of the two CTT tubes and the tops of the left and right VT of fridge.

 Description:

This item is the extra tubes and connectors needed to make a keg cutout.

It is standard to have your fridge roll in and out on the concrete. This kit does not have any extra parts to build a not needed fridge platform.

WARNING:  Your fridge must not be more than 35." high to fit under the top track of the frame. (This measurement includes the 1" thick leveling feet)

that you will add under the frame. If you must use a fridge over 35" tall the only option is to house it in a bar height module. 

 What's Not Included:

This kit does not include the actual drawers, cement board, a 4ft module, screws,  etc...

ASSEMBLY REQUIRED - No Screws Included